|
|
|
|
|
|
|
|
.jpg "SMP10")
Melting point apparatus, Digital, SMP10 and SMP20
Digital selection & display of temperature
High accuracy
Easy to operate with plateau facility
Ideal for educational use
Supplied with calibration certificate
The SMP10 has been designed with safety and ease of operation in mind making it ideal for use in education. The temperature is selected, measured and displayed digitally making it accurate and negating the need for a thermometer.
Two samples can be tested simultaneously. They are viewed via a magnifying lens with clear observation aided by built in illumination. Extendible back feet allow the unit to be operated at the optimum viewing angle. Full access to the block aids cleaning. The simple to follow instructions are printed directly on the instrument in most European languages for ease of use.
To operate simply select a plateau temperature via the three digit display and press "start". The unit quickly heats up and remains at the selected plateau temperature until the user is ready to start the test. Insert the sample tubes and press "start". The unit then heats slowly so that the melt can be observed. When the sample is seen to melt, note the temperature on the display. Press "stop" to end heating and cool the block.
Supplied complete with calibration certificate showing individual serial number for traceability.
High accuracy
Easy to operate with plateau facility
Ideal for educational use
Supplied with calibration certificate
The SMP10 has been designed with safety and ease of operation in mind making it ideal for use in education. The temperature is selected, measured and displayed digitally making it accurate and negating the need for a thermometer.
Two samples can be tested simultaneously. They are viewed via a magnifying lens with clear observation aided by built in illumination. Extendible back feet allow the unit to be operated at the optimum viewing angle. Full access to the block aids cleaning. The simple to follow instructions are printed directly on the instrument in most European languages for ease of use.
To operate simply select a plateau temperature via the three digit display and press "start". The unit quickly heats up and remains at the selected plateau temperature until the user is ready to start the test. Insert the sample tubes and press "start". The unit then heats slowly so that the melt can be observed. When the sample is seen to melt, note the temperature on the display. Press "stop" to end heating and cool the block.
Supplied complete with calibration certificate showing individual serial number for traceability.
| Number of samples | 2 |
|---|---|
| Temperature range | Ambient to 300°C |
| Temperature accuracy | ± 1.0°C at 20°C, ± 2.5°C at 300°C |
| Display | Three digit LED |
| Display resolution | 1°C |
| Sensor | Platinum resistance PT100 |
| Ramp rates | 20°C per minute to plateau, 2°C per minute to melt |
| Dimensions (w x d x h) | 160 x 220 x 170mm |
| Net weight | 1.8 Kg |
| Electrical supply | 230V, 50Hz, 75W |
Melting point tubes
Made from soda glass, these tubes are easy to seal in a Bunsen flame and break into two. Supplied in robust tube holder, pack of 100 tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner diameter = 1.3mm and wall thickness = 0.3mm.
| Model | Description |
|---|---|
| SMP10 | Melting point apparatus, complete with pack of 100 melting point tubes, closed at one end |
| SMP10/1 | Glass melting point tubes, closed at one end, pack of 100 |
| SMP2/1 | Glass melting point tubes, closed at both ends, pack of 100 |
| SMP1/4 | Glass melting point tubes, open at both ends, pack of 100 |
Return to Category
Not what you're looking for ? Try our product selector
